Electromagnetic flowmeter
Thread Content
I have a Coriolis mass flow meter used for measuring circulating water. The pipeline is currently empty, but the meter’s reading fluctuates greatly (between -500 t/h and 1000 t/h). I would like to ask fellow users what could be causing this issue
The reason for air traffic control testing is to check the gauge alarms and refer to the manual. It will be fine once the pipe is filled with water.
Agree with the second floor’s opinion; enabling the air traffic control detection function should be better
One is that there is gas flowing through, 2 is that your gauge is broken.
I sell Cologne electromagnets; generally, it’s as described on the 2nd floor.