1834 Ubbelohde viscometer
Thread Content
Manufactured in accordance with ISO 3105 and ASTM D 446 standards. Suitable for measuring the viscosity of products such as oil. Among them, the 0C-2 specification is used for the determination of viscosity and intrinsic viscosity of polymer dilute solutions according to GB1632-93, as well as in other related standards. The total length of the product is approximately 283 MM. The diameter of the capillary is specified in MM, while the range of kinematic viscosity is given in MM2/S: 00: 0.24–0.3; 0C: 0.36–0.6; 0B: 0.46–1.5; 0A: 0.5–1.7; 10.5: 8.2–10.1; 1C: 0.78 (0.77): 6–30; 1B: 0.88: 10–50; 21.0: 32–100; 2C: 1.36: 60–300; 2B: 1.55: 100–500; 2A: 1.71: 150–750; 31.8: 320–1000; 3C: 2.43: 600–3000; 3B: 2.75: 1000–5000; 43.2: 7200–10000; 4C: 4.32: 6000–30000; 4B: 5.21: 10000–50000; 56.25: 20000–100000. Note: A diameter of 0.34–0.4 MM is used according to GB8326-87; a diameter of 0.36 MM is used per HG/T2626-94 and 2627-97; a diameter of 0.77 MM is used according to GB/T14190-9; a diameter of 1.03 MM is used per HG/T2364-92. Chemical industry discussions
Is this online testing or in a laboratory? Are there any samples? Wouldn’t it be good to use a colored picture?
There’s a lot of information here; let’s focus on the key points
This is for the laboratory. What type of sample analysis do you carry out? We can conduct analyses for you. If you need a proposal, I can send you some product information
Would it be possible to add your contact information: vx:zhenyuekeji