Help! Who has the Chinese version of Sentinel LCT4?

Ask the manufacturer to include it; it should be specified in the contract at the time of purchase, with a request to provide a Chinese version of the instructions

It seems there is no Chinese instruction manual; I only have the English one

How is this LCT you’re using? Is it prone to failures?

If it is installed and adjusted properly, there are usually no problems. The design needs to be reasonable; installation is very important, and someone must be present to oversee the process. Only the coupling agent needs to be replaced

LCT4 is a flow meter that uses ultrasonic technology to measure the flow rate of gases and liquids. It consists of a host and a sensor, and can be operated and displayed via a digital display. The following are the basic steps for operating Sentinel LCT4: Installing the sensor – Properly install the sensor on the pipeline, and follow the instructions to ensure that the sensor is aligned with the pipeline. If the sensor is already connected to the host, this step can be skipped. Connect the host: Follow the instructions in the manual to connect the host to the power supply and attach the sensor. Ensure that the power supply and sensor connections are correct. Turn on the host: Press the power button on the host’s panel to start it up. The Sentinel LCT4 has multiple adjustable parameters, such as flow unit, calibration coefficient, output signal, etc. Set the required parameters according to the instructions in the manual. Measure flow: View the current flow value on the digital display as needed. Data can also be outputted in other ways, such as through analog output signals or digital communication ports. Stop using it. After use, press the power button on the main unit’s panel to turn it off, and disconnect the power supply and sensors as necessary.