CEMS online monitoring system trolley
Thread Content
I would like to ask everyone: what caused the outer glass bottle to break when using the high-precision filter in the CEMS online monitoring system? The flow meter is also functioning properly
Additional note: The pressure is between 0.5–0.6 MPa
It may have burst because the pressure exerted on the outer glass bottle exceeded its tolerance limit, or it could be due to cracks in the bottle or defects in its material. It is necessary to check whether the pressure before and after the filter is too high, as well as whether the filter itself is damaged. It is also necessary to ensure that the correct glass bottles and proper procedures are used. .