Problem of high-pressure and low-pressure difference in the heat recovery unit of hydrogenation plants

The appropriate pressure difference between the hot high-pressure section and the cold high-pressure section in a hydrogenation unit depends on the specific design and operating conditions; generally, this pressure difference is kept between 0.2 and 0.5 megapascals. If the pressure difference is too high, it may lead to unstable operation of the equipment, as well as increased energy consumption and maintenance costs. If the pressure difference is too high, the following solutions can be considered: 1. Check whether the filter elements and valves are clogged, and clean them or replace them. 2. Adjust the opening degree of the process control valve to reduce pressure loss. 3. Verify whether there are other factors within the system causing pressure filtration, such as excessive flow or equipment failures. 4. Optimize operating conditions, such as adjusting feed temperature and pressure, to improve heat exchange efficiency. 5. If it is a design issue, technical modifications to the process or equipment may be required. It should be noted that differential pressure adjustment must be carried out carefully, taking specific circumstances into account, to avoid affecting the normal operation of the hydrogenation unit and its efficiency. .

I’ve already learned it; I’m about to study this part of the knowledge