Is the safety valve outlet pipeline connected to the absorption tower?
Thread Content
There are two towers: an absorption tower and a desorption tower. Currently, it is planned to connect the outlet pipeline of the safety valve at the top of the desorption tower (which has a higher temperature) to the bottom of the absorption tower (which has a lower temperature). Should the design temperature of the absorption tower then be set according to the design temperature of the desorption tower? Thank you
The high back pressure of the absorber safety valve introduced by the analysis tower affects the discharge process, and discharge can also cause overpressure in the absorber.
The pressure is all slightly positive, so it should have little impact
Normally, the pressure in the distillation tower is higher than that in the absorption tower; it seems unsafe for the high-pressure safety valve to activate and allow fluid to flow into the low-pressure system.