Help: An error has occurred in the Block of the rigorous calculation module RadFrac for Aspen absorption towers
Thread Content
There’s an issue with the feed position setting. But shouldn’t the condenser in the absorption tower be set to None? I’d like to ask how this condenser should be configured I hope an expert can give some advice; I’d be extremely grateful~~:handshake
If it is a absorption tower (without a condenser), liquid must flow in on the first plate
It means that when the condenser is set to none, there must be feed at the tower top, and it is generally set to on stage
I realize my mistake; there is a lack of liquid feed at the top of the tower. Thank you very much~
Thank you so much, I’ve fixed it~~