We need to buy a water pump; everyone who sells water pumps, come over.
Thread Content
The mechanical seal of the company’s material feeding pump needs to be replaced frequently, as the material is somewhat sticky; it is a liquid with a solid content of around 42, and it has good flow properties, so there’s no need to worry. Given the constant problems that arise, it is necessary to purchase a centrifugal pump equipped with a seal water system; this seal water can enter part of the pump interior to help clean the seals. A flow rate of 20 cubic meters per hour will suffice.
It is possible to choose a slurry pump with an open impeller, double-end mechanical seals, and cooling water for flushing – it’s not difficult.
Yeah, I have this problem too; come quickly
Pumps are easy to choose; for the mechanical seal auxiliary system, external flushing is sufficient
An open impeller with dynamic sealing can be used. If possible, using 32 is also good!
For open impeller slurry pumps, a sealing arrangement with external flushing using 32 or 54 solutions is perfectly fine.
Does your company have such pumps? We can talk more about it