Pump selection
Thread Content
Working pressure: 10 MPa, temperature: 180°C, flow rate: 60 ml/min; the medium is methanol. Please help, guys
Hello, OP! Plunger pumps are the preferred choice; if pulsation is a concern, a buffer tank should be used. The price is not expensive either. Secondly, a multi-stage centrifugal pump is selected for stability. Once again, for triple-screw pumps, the manufacturer has to be foreign. I hope this can help you!
The pumps produced by Dalian Riva, or Mintonro, are of good quality.
For this flow rate and pressure, it’s fine to use a metering pump; however, the high temperature and low viscosity make it slightly challenging
A metering pump can meet the requirements
You can choose plunger pumps; feel free to purchase them. Professional technical consultation on chemical and petrochemical equipment is provided free of charge
High-temperature metering pump with remote pump head