Thrust disc heating removal
Thread Content
This post was last edited by wx_Ink Fragrance 822822 on 2023-4-23 at 18:14. For heating and removing the thrust disc, can flame be used directly? Are there any things to keep in mind?
It is not recommended to use direct flame heating of the thrust disc for disassembly. Doing so may damage the thrust disc or other components, and it poses a significant safety risk. It is recommended to use specialized tools or follow the steps in the instructions for disassembly. If you are not sure how to proceed, it is recommended to seek help from a professional. .
It would be best to send a video for easier discussion. Typically, the thrust disc is part of the sliding thrust bearing on the rotor; its mechanical structure varies, and heating or disassembly may cause it to deform. For reference.
Generally, heating is not required; uneven heating may cause deformation. Doesn’t the manufacturer provide special tools?
66666666666666666
This needs to be analyzed on a case-by-case basis
Use a ram; unless it’s completely rusted out and the shaft is ruined, if you want to repurpose something else on that shaft, then burn it
66666666666666