Operating temperature for IH and IHG pumps
Thread Content
IHG type stainless steel pipeline centrifugal pumps are used for transporting liquids that contain no solid particles, are corrosive, and have a viscosity similar to that of water. They are suitable for use in industries such as petroleum, chemicals, metallurgy, power generation, papermaking, food and pharmaceuticals, and synthetic fibers. The operating temperature range is from -20°C to 120°C. The IH type chemical pump can handle media at temperatures ranging from -20°C to 105°C; when necessary, a double-end face seal cooling system is used, allowing it to transport media at temperatures from 20°C to +280°C. It is suitable for use in industries such as chemicals, petroleum, metallurgy, power generation, papermaking, food processing, pharmaceuticals, environmental protection, wastewater treatment, and synthetic fibers, for transporting various corrosive or water-like media that must not be contaminated. For the jacket of the reaction vessel, the medium temperature ranges from -20°C to 120°C. It’s fine to use the IHG type for smaller vessels, but I’m not sure how to choose the appropriate type for larger vessels.
Based on the information you provided, the IHG type stainless steel pipeline centrifugal pump is suitable for transporting liquids with a temperature range of -20°C to 120°C, which contain no solid particles, are corrosive, and have a viscosity similar to that of water. It is applicable to industries such as petroleum, chemicals, metallurgy, power generation, papermaking, food and pharmaceuticals, and synthetic fibers. The IH type chemical pump is suitable for transporting liquids with a temperature range of -20°C to 105°C. If it is necessary to transport liquids with a temperature higher than 105°C, a double-end face seal cooling device can be used, allowing the transport of media within a temperature range of 20°C to +280°C. IH pumps are suitable for use in industries such as chemicals, petroleum, metallurgy, power generation, papermaking, food processing, pharmaceuticals, environmental protection, wastewater treatment, and synthetic fibers, for transporting various corrosive or non-contaminable media similar to water. As for the selection of jacketing for the reaction kettle, based on the temperature range you provided, an IHG-type pump can be used for smaller kettles, while an IH-type pump is suitable for larger kettles. I hope this information will be helpful to you! .
When selecting a pump, prefer horizontal models unless space at the site does not allow it. All use IH