【Sea and River Safety Discussion】How should safety inspections be conducted – in a superficial manner or in a thorough and systematic way?
Thread Content
The last edit to this post was made by Desert Fish on 2022-6-15 at 22:33. Five key aspects of safety inspections – clarity after reading them. 1: Inspection of safety mindset and awareness. Mindset and awareness, in the context of daily inspections for safe production, often seem abstract and not closely related to reality, making it difficult to know where to start with the inspection； With the continuous updates to the Work Safety Law, our guidelines for safety inspections have also become more comprehensive ； During the inspection, it is essential to ensure that the principles of safe production and the priority given to safety are put into practice, by focusing on four aspects: height, degree, depth, and breadth ；
The last edit to this post was made by Desert Fish on 2022-6-15 at 22:31. Edit 2: Inspection of safety attitudes and awareness. Attitudes and awareness, in the context of daily inspections for safe production, often seem abstract and not closely related to reality, making it difficult to know where to start with the inspection； With the continuous updates to the Work Safety Law, our guidelines for safety inspections have also become more comprehensive ； During the inspection, it is essential to ensure that the principles of safe production and the priority given to safety are put into practice, by focusing on four aspects: height, degree, depth, and breadth ；
The last edit to this post was made by Desert Fish on 2022-6-15 at 22:32. Edit 2: Inspection of safety hazards – Corporate standards are generally higher than local standards, local standards are generally higher than industry standards, and industry standards are generally higher than **standards； Are personnel, materials, machinery, the environment, and management in compliance with the relevant regulations and standards? ； Whether the dynamic management of the \"dual-control\" mechanism for safety management and hazard identification has been effectively regulated.
The last edit to this post was made by Desert Fish on 2022-6-15 at 22:32. 3: Inspection of safety measures 1) Are the safety technical measures specifically addressed in the construction organization plan? Have the approval procedures at the company level, project team level, and supervision level been carried out? And have these measures been effectively implemented during the construction process?； 2) Have special safety construction plans been prepared for operations such as foundation pit work, support systems, excavation, temporary power supply, scaffolding of various types (fastener-type, disc-type, cable-stayed type, climbing type, etc.), tower cranes, construction elevators, and lifting operations? Have these plans been approved in accordance with relevant regulations at all appropriate levels?
The last edit to this post was made by Desert Fish on 2022-6-15 at 22:32. 4: Inspection of safety education and training – Before entering the living area, personnel must submit their travel code, health code, and valid nucleic acid test results, as well as their ID cards. They must also undergo three levels of safety education before being allowed to enter, and they need to pass a test in order to work at the construction site. Specialized workers such as welders and electricians must present valid professional operation certificates before they can enter the site to carry out work.
The last edit to this post was made by Desert Fish on 2022-6-15 at 22:32. 5: Inspections for the handling of safety accidents. After an injury or death accident occurs at a construction site, it is necessary to strictly follow the \"four no-lets-go\" principles for handling such accidents: 1) Do not let go until the cause of the accident has been identified； 2) Those in charge must address the issue; no exceptions ； 3) Do not let go until corrective measures are implemented ； 4) Those involved who have not received education will not be spared.
If a thorough inspection in accordance with the safety management system is to be carried out, it’s really necessary to have an expert team
Form a team to learn how to conduct inspections, and turn the team members into experts