Recheck the cutting dimensions of the plate?
Thread Content
For material 09MnNiDR, the drawing specifies a comparative impact test at low temperatures; the test temperature is -50°C. What should be the cutting dimensions?
The thickness is 26mm, 24mm.
Discuss it with your chemical and physical engineers~
Look at the processing method of the test blocks. For wire cutting, it has to be at least 15*26*150. Leave space for the clamping size.
Don’t worry about it. Generally, the cutting dimensions are much larger than the size of the sample required! ! This may be due to the need for the material handler to firmly grip the material.
The dimensions of the impact specimen are: 55×10×10