Parameter settings for small chlorine stripping towers
Thread Content
I recently set up a small device for electrolyzing concentrated brine. Similar to the ion-exchange membrane process used to produce sodium hydroxide, the chlorine content in the dilute brine at the anode is too high; I want to use a stripping tower to reduce this chlorine level, but I have no knowledge at all about this topic. How should it be configured? My brine flow rate is around 10 kg/h. How should I set the parameters for this small stripping tower? Such as the packing height, gas-liquid ratio, and so on. Thank you all! ! !
A saltwater flow rate of 10 Kg/h should be easy to handle.
I have no idea at all :'( Please help design the parameters – for example, what diameter the stripping tower should have, and what the approximate height of the packing will be: handshake