Issues regarding the cleaning of the filter cartridges in the quench water filters of sulfur plants
Thread Content
It has only been operating for a short time, and due to poor control in the sulfur production section, some gaseous sulfur ended up in the exhaust stream, which caused the filter cartridges in the quench water filter to become clogged. Once the filter cartridges of the precision filter are removed, they are difficult to clean; trying to clean them with steam or a wire brush is troublesome, and the cleaning result isn’t very thorough. Does anyone know any effective ways to clean these filter cartridges in a clean and efficient manner?
Using high-pressure water to clean the filter cartridge is not good; it **shortens the lifespan of the filter cartridge**
The pressure isn’t very high; our workshop has demineralized water at 3.0 MPa. Wearing a raincoat while doing the cleaning gives good results
The pressure of 30 kilograms of deionized water is already quite high; we usually use steam at 0.3 MPa for purification, and it seems to work quite well