Smoking nicotinic acid color mixture
Thread Content
Today’s test results showed that the color of nicotinic acid was unclear; the personnel in charge of acid production were instructed to take samples on site for further observation, and it was confirmed that the color indeed was unclear. It was also found that the resistance to power waves was insufficient, so the staff were asked to increase the pressure at the main nozzle in order to raise the resistance to power waves to around 2.1 KPA. At the same time, an inspection of the condition of the power wave fluid revealed a large amount of hydrogen sulfide; therefore, waste discharge and fluid replacement were carried out using the power wave and gas cooling tower to enhance the purification efficiency.
Thank you for sharing your experience. The dynamic wave drag loss is one aspect; it seems that there’s quite a lot of sulfur being sublimated in your system – is the air flow rate of the furnace low?
The main issue is that the vehicle stays parked for a long time, which makes me a bit worried before driving it again; to ensure smooth driving, I add more sulfur when starting the engine
It returned to normal after normal production resumed