Pneumatic V-ball valve
Thread Content
If a pneumatic V-ball valve is installed in the wrong direction, could it lead to poor sealing and significant leakage?
Sealing performance should not be affected, but the flow characteristics will change
The V-shape is reversed; it depends on whether a V-shaped opening is created on the ball itself, or whether an eccentric ball is used together with a V-shaped valve seat – the situations are different in each case. The orientation has little impact on flow rate
There is a V-shaped cut on the ball; if such a valve is installed in the wrong direction, the leakage will be severe.￥?
There will be no leakage, but the traffic characteristics will change. It is recommended to return it to its original position