Chain plate types for chain conveyor systems and troubleshooting of common issues

Thread Content

1. Types of chain plates for chain conveyor belts: Generally speaking, the main types of chain plates used in chain conveyor belts are as follows: Cast chain plates – these are made from gray cast iron or malleable cast iron, and are typically used for transporting hot or sandy materials. Furthermore, if the chain plate is shallow, the inclination angle can only be below 25 degrees; but if it is deeper, the inclination angle can be 35 degrees or even higher. Deep-groove chain plates: They are primarily used for transporting bulk materials, with an inclination angle that can exceed 30 degrees. Shallow-groove chain plates: They are primarily used for transporting bulk materials that are not sticky, with an inclination of less than 20 degrees. 2. Solutions to some problems in stainless steel chain plate conveyors: Problem 1 – Chain plate deviation: Adjust the tensioning shaft at one end of the driven shaft, but do so slowly to avoid scratching the edges of the conveyor belt. Question 2: The vibration of the chain plate may be caused by obstacles on the conveying frame, as well as by an improper fit between the sprocket and the chain plate.