Thread Content
We solemnly promise: in the event of any quality issues with the product, returns and exchanges are available without conditions! 【Main Components】The paint series designed for Santas cooling towers is a two-component product composed of chlorinated rubber, polyether-modified resin, stabilizers, curing agents, pigments, fillers, additives, and solvents. 【Key Features】The paint specifically designed for cooling towers boasts excellent water resistance and good corrosion resistance. 【Main Uses】The paint designed for cooling towers is suitable for anti-corrosion and decorative purposes on ship hulls, waterlines, and the inner walls of various water towers. 【Color and Appearance】Surface color: Iron red; Base color: Dark brown 【Basic Parameters】 1. Theoretical application rate: 5–7㎡/kg 2. Dry film thickness: 20–35μm 3. Drying time: ≦2 hours (surface layer) ≦24 hours (entire layer) 【Packaging Specifications】 Paint : Curing agent = 20 kilograms per bucket; Curing agent = 4 kilograms per bucket 【Application Time Limit】 8 hours (at 25°C) 【Surface Preparation】 The surface to be painted must be clean, firm, free of oil, dust, and any other contaminants; there should be no acid, alkali, or moisture on the surface. The surface should be sanded to create a rough texture before applying the topcoat. For cement surfaces, it is necessary to apply a sealing agent first, followed by the application of the primer and topcoat ； It is recommended to apply a matte varnish over the metal paint. 【Coating Method】Airless spraying, air spraying, roller/coating 【Storage Period】Store in a cool, dry, and well-ventilated place; the paint can be stored for one year, while the curing agent can be stored for six months. 【Precautions】 1. Read the instructions before starting construction ； 2. Before use, stir the paint thoroughly; if a curing agent is required, prepare it in the specified ratio – use as much as needed – and apply it after thorough mixing, using it within 8 hours ； 3. Keep the work area dry and clean during construction; contact with water, acids, alcohols, alkalis, etc. is strictly prohibited ； After applying the paint, the container holding the curing agent must be tightly sealed to prevent it from setting ； 4. During construction and drying, the relative humidity must not exceed 85%; this product must wait 7 days after coating before it can be put into use.