If an acid water tank does not have a water seal or the water seal is damaged, and acidic gases are escaping from the vent valve, what should be done?
Thread Content
Will they mention what kind of treatment facilities should be installed next to the breathing valve? O(∩_∩)O Thank you
How could the water seal get damaged? If there is a problem with the water seal, address it promptly. A combination of a water seal and a vent valve should serve as a double safeguard.
That is, in the case of no water seal and only a breathing valve, are there any measures that need to be taken?
How to fix it? There are usually no valves in the pipeline from the large tank to the water seal – so how can the water seal tank be separated?
I’ve seen before direct venting of the tank top with a three-way connector; some of these lead to the flare, while others lead to the atmosphere. During special periods, it is possible to release some of the torches. As for that water seal that cannot be removed, it can only be repaired or modified after shutting down operations or removing the tank~~~
Dude, are there any valves on the pipeline from your current acidic water tank to its water seal tank?
No, it can’t be sealed completely; otherwise it will become blind. It mainly relies on nitrogen sealing along with a flare line. It seems there were some renovations done later on; I just passed by in a hurry on a business trip and didn’t follow up on it~~~~
Isn’t a water seal quite reliable? How is it possible that it doesn’t work as intended?
It’s probably a design issue~~~~~~
It’s just a pressure vessel at normal pressure. . . How could there be a problem?