Acid mist determination
Thread Content
Experts, how can I measure the acid mist at the inlet and outlet of the drying tower? The amount of acid mist emitted from the final drying tower is particularly high. I would appreciate it if you could advise me on how to deal with this issue…………
Do a stick test: when acid foam is splashed on a clean stick, black spots will form.
The acid mist emission is high; is a fiber mist eliminator installed? Only by adding auxiliary equipment can the problem be completely solved!
Thank you, the problem has been resolved. The acid pipeline beneath the drying tower was damaged due to acid corrosion; the pipeline has been replaced, and now everything is fine
That’s not a leak. . . . . Is it the acid distributor that’s corroded and damaged? I didn’t understand
Our company’s products can measure acid mist concentration online; they have been used in the Zijin Mining Company in Heilongjiang. Feel free to contact us at 13488680104, also via WeChat
A simple method is to use a stick for testing; the size and number of black spots on its surface can be used to make a judgment