Activated carbon filter
Thread Content
In water treatment, the main function of activated carbon filters is to remove organic substances and residual chlorine. So, what is the effectiveness of activated carbon in removing particulate impurities? I removed the multi-media filter at the front, mainly to remove particulate matter. Could some expert give me some advice?
Of course, the activated carbon filter can remove suspended solids; however, by removing the multi-media filter, the load on the activated carbon filter increases. As a result, its operating cycle becomes shorter, and it is necessary to adjust the frequency of backwashing
Activated carbon filters are completely ineffective at removing impurities. For water treatment, it depends on the requirements and intended use of the filtered water. For industrial use, fiber cotton filters or 304 stainless steel filters can be chosen; if the water is to be used for drinking, then 316L stainless steel filters are necessary. You can consult Luthol Filter; they mainly produce this type of filter element
Activated carbon has a certain filtering capability, but due to its high porosity, its effectiveness in removing solid particles is not better than that of multi-media filters. Activated carbon is primarily utilized for its adsorption properties.
Thank you for the guidance! The quality of my water is not very good; the main task is to filter out the particulates in it. There is a PP cotton filter element at the back, and it’s mainly used to remove particulate matter at the front.
Quartz sand is used to remove suspended solids, while activated carbon is utilized primarily for its adsorption properties.
Thank you for the reminder. I originally planned to use quartz sand, but the managers insisted on using activated carbon; there was nothing I could do about it! It’s frustrating