How to wire and set parameters for the digital display model LDTB-3122/GA
Thread Content
This post was last edited by Wandering Dawn on 2016-8-5 15:27. Dear seniors and colleagues: 1: How should the digital display model LDTB-3122/GA be wired and its parameters set? 2: Also, for this dual-window digital display, how can one window be disabled? Thank you!
It’s best to ask the manufacturer for the instructions; they are available, including those related to configuration
Thank you. I just saw the instruction sheet – it’s only one page. The instructions regarding wiring are very simple. As for what I wanted to know, namely how to mask a window, their technicians said I would need to ask someone else. I’m really frustrated. .
It’s a digital display with two digits; typically, the PV value is shown on the top and the SV value on the bottom. Of course, some models allow for custom configuration changes, but it’s necessary to refer to the manual. If what you need is listed in the manual, then it’s possible to do it; otherwise, it’s not feasible to achieve the desired function, as many smart digital displays are built using microcontrollers, and one needs to understand that programming language in order to work with them
Thank you. By dual windows, I mean that a 2-digit display device is equivalent to two separate meters. This isn’t mentioned in their manual. We did some shielding work via phone communication in the past, but that was several years ago; since the changes were made on-site without any records being kept, I’ve forgotten about it now. So, an explanation is needed.