Please tell me about the problem of compressor oil transportation.
Thread Content
When transporting compressor oil, does the compressor need to be involved in the oil transport? Or should the compressor be isolated with metal hoses? When transporting oil, what equipment at the oil station needs to be involved in the oil transport process? What should be the process of oil transport? What issues should be paid attention to when transporting oil? How to deal with it to shorten the oil transport time? Does anyone have an oil transport plan? Can you send me a reference?
1. Oil transportation needs to be completed before the compressor is put into use, so the compressor does not participate in oil transportation. What equipment does the gas station have? Those who have nothing to do with oil transportation do not need to participate.
:o2. The oil transportation process is generally like this. The first is preliminary flushing, which aims to check the tightness of the oil pipeline system and flush out larger debris in the pipeline. ； At this time, all oil inlet points can be disassembled and connected to temporary pipelines to enter the bearing box or directly returned to the oil tank of the oil station, and then the oil pump can be started for circulation flushing. After the initial flushing, it is necessary to clean the filter screen, drain the lubricating oil in the tank, clean the fuel tank, remove all temporary pipelines, and restore the oil system pipelines to operating conditions. However, temporary filters must be installed at each oil inlet, and the oil pump should be started again for cyclic flushing. During this period, the temporary filters must be inspected and cleaned at regular intervals until they are qualified. 3. When transporting oil, you should mainly check the temporary pipelines and temporary filters to ensure that the lubricating oil does not enter directly into the bearings and bearing bushes during oil transport. ； When transporting oil, a wooden hammer should also be used to tap the exposed pipelines of the oil system, especially elbows and welds. 4. To shorten the oil transportation time, pipelines and oil tanks must be cleaned before starting oil transportation. If possible, pickling should be performed first.
The equipment of the oil station includes a main oil tank, a high-level oil tank, two oil pumps, an oil filter, an oil station accumulator, a plate heat exchanger, and various oil supply/return lines with various valves connecting the compressor and the turbine.
These devices must be involved in the oil circulation process. You mentioned the equipment on the gas station. I thought you had installed some other equipment on the gas station.