What is the wall thickness of a 90-degree welded elbow, DN25, ASME B16.11 CL3000, SW?
Thread Content
What is the wall thickness of a 90-degree welded elbow DN25 ASME B16.11 CL3000 SW? How do I check it?
Isn’t this plug welding? What wall thickness needs to be checked? :L
SW refers to butt welding; regardless of the type of welding, elbows always have a wall thickness, and I need this parameter
SW should be socket weld; for the wall thickness of socket fittings, you can refer to the relevant provisions in ASME B16.11 Socket Weld and Threaded Forged Fittings
The last edit to this post was made by Thank goodness you're here on 2016-11-3 at 13:25. Ah, SW involves plug welding in accordance with ASME B16.11; if you insist on using butt welding, then refer to ASME B16.9. You also need to specify the wall thickness of the pipeline, not the pressure rating of 3000.
I’m also annoyed by the elbow that the design institute chose
That’s okay; just refer to ASME B16.11 – the construction process isn’t difficult at all. 2\" or smaller diameter?
You can check the relevant manuals; it might be mentioned there. Or you can simply ask the manufacturers of elbows for information as well
The construction is simple; when submitting material requests in the ERP system, it is necessary to enter the thickness information
For socket splices, the grade you write is CL3000