Recommendations for pressure regulators for fuel gas used in burners
Thread Content
I have a project that requires a fuel gas pressure regulator, a stand-alone type capable of reducing pressure from 30 kilograms to 0.5 kilograms. Could you recommend some good manufacturers?
Fisher gas pressure regulator! We’re using it! Stabilizing it at 0.1 kilograms is no problem
For self-actuating valves, the better ones are Fisher and SAMSON
I’ve never used a device of this kind that converts medium pressure to low pressure; the pressure range it covers is really wide. In our factory, the gas pressure is 6–7 bar, and domestic products are sufficient for such purposes
If the pressure difference before and after is large, it is recommended to use FISHER. It is recommended not to use domestic ones
This post was last edited by cqdfwy on 2016-11-18 at 11:34. 1. The pressure range is too wide; it is recommended to reduce the pressure in stages； 2. The three Emerson brands of FISHER, FRANCEL, TARTARINI, as well as the Italian brand FEIO are all available ； If stepped-down voltage reduction is used, Jiuan under Emerson in China or Shanghai Fei’ao would also work ； 3. It is recommended to bring along a safety shut-off device (not a regular shut-off valve, but one designed specifically for gas) as well as a safety relief device (similar to a safety valve); consult the manufacturer together with a self-acting pressure regulator to find suitable products.
Thank you all. In the end, Samson was chosen, and its performance is quite good