Thread Content
This post was last edited by GOIHI on 2016-11-29 at 10:25. What are the things to keep in mind when installing a submersible mixer? How to select a submersible propeller? An introduction to the method for selecting submersible propellers: The process of selecting such propellers is actually similar to that used for submersible mixers. Below, the editor will explain the method for choosing submersible propellers. Submersible low-speed propellers – Considerations for selecting submersible propellers: 1. For every 500 cubic meters of volume, a propeller with a power output of 1 KW and a torque of over 60 Nm is required; practical tests have shown that this configuration yields good results. Some small impellers cannot achieve this effect at high speeds. 2. Circular pools, track-shaped pools, and ring-shaped pools can reduce power consumption by 10%, while square pools, rectangular pools, and triangular pools require an increase of 10% in power consumption; the larger the pool shape, the more the power consumption can be reduced. 3. For every 10% increase in medium density, the power must increase by 30%. 4. For square and rectangular tanks, considerations can also be given to aspects such as the size of the impeller, the helix angle, the installation location, and the positions of the inlet and outlet ports, in order to achieve no dead zones or only minimal dead zones. 5. Regarding the issue of flow velocity, since there are many mixers used for pumping fluid, it is necessary to provide relevant data such as the original flow velocity, the cross-sectional shape of the tank, its length, etc., as well as the desired flow velocity. Our company is able to provide the corresponding products. It is a relatively complex process. For selection questions, please contact the supplier. 6. Installation height of the submersible agitator: (1) For tanks with an impeller diameter of less than 1 meter, it is from the bottom of the tank to the center of the agitator, with X = impeller radius + 0.7 meters. (2) For impeller diameters of 1 meter or more, it is calculated as radius + 1 meter. (3) The installation height can be appropriately increased or decreased according to the pool depth. How to select a submersible mixer? Methods for selecting a submersible mixer. How to use a submersible mixer? How to use a submersible mixer? Overview of the applications and performance of submersible propellers. Introduction to chemical vertical mixers. Detailed procedure for installing check valves on submersible mixers. What is the difference between submersible low-speed thrusters and mixing submersible mixers? Introduction to the performance characteristics of the QJB type submersible thruster. How to select a submersible propeller? Selection of underwater propellers – How to ensure the proper operation of underwater propellers? By the way, what is the structure and working principle of horizontal submersible mixers? How should submersible mixers be repaired when they malfunction? Introduction to the four functions of submersible mixers in wastewater; introduction to the installation requirements and precautions for submersible mixers; introduction to the main unique features of submersible mixers. This article is provided by Submersible Mixers; original address: http://www.yijuliuti.com/cpzs/215.html