Air valve
Thread Content
Are there any special requirements for selecting air cut-off valves and control valves? Is it necessary to consider the impact of oxygen in the air on valve selection?
Feel free to make your choice – there are no special requirements for the selection! If special requirements are applied to air, what will become of other media? !
There are no special requirements for natural gas either, right?
Well, it’s okay. I don’t have any special requirements. It all depends on the pressure of the natural gas; high pressure will definitely require special handling
Oxygen-grade ones need to have the fat removed; there’s nothing special about the others
If it’s not particularly pure oxygen, there’s no significant impact on normal operation; the shut-off valve can be used as a switch to cut off flow, while the control valve allows for precise adjustment of the flow rate
The choice of medium is fixed: whether it’s air or oxygen. Even in the case of oxygen-rich air, there are requirements regarding the material of the valves, and there are also specific requirements for these valves, such as the need for oil-free operation. . . Take a look at the parameters of the valve, such as pressure, nominal diameter, medium, temperature, material, etc., applicable to,,,