Features and technical specifications of spherical compensators
Thread Content
Features of spherical compensators: 1. High compensation capacity, small space occupation, low fluid resistance, and attractive appearance. 2. It can rotate at any angle around its axis, and it can also be bent in any direction; the bending angle is ±15°, for a total of 30°. 3. It has good sealing performance; its sealing material is highly elastic, has a low friction coefficient, excellent lubrication properties, and requires a low torque for rotation. The sealing material is carbon fiber produced by Toray Industries, Japan. 4. Due to its high compensation capacity, a set of ball compensators can be installed over a distance of around 300 meters; as a result, fewer fixed supports are needed, which reduces the total investment and energy consumption. 5. It can balance the blind plate force on its own. Technical specifications of spherical compensator: 1. Model: QB 2. Operating pressure: (1.0～4.0) MPa 3. Operating temperature: -100℃ ≤ 500℃ 4. Nominal diameter: DN40-DN1200 mm 5. Total bending angle: ≤30° (±15°)
It’s described in great detail, providing a basis for making a selection.
It’s described in great detail, providing a basis for making a selection.
The maximum angular compensation for the hinge-type design is 16 degrees – is it ±16 degrees or ±8 degrees? What is the basis for this?