We often peel off a few layers of the wrapping pad to achieve the right size for use
Thread Content
We often peel off a few layers of the wrapping pad to achieve the right size for use – is that okay?
No, the strength isn’t enough like this; it’s easy to fall apart during installation.
No. At most, the rings on the inner and outer rings can be polished, but it’s labor-intensive and costly.
It depends on the type of gasket. If it’s a basic type, it’s fine; but if it’s a type with rings, those rings must not be removed, otherwise the gasket will easily fall apart under pressure
:Lol, I also want to ask, “What kind of company is this?” ”;P
It can’t be peeled. In the production of gasketing, there are 2 spot welds per turn, and the steel strip has a certain tensile strength. After peeling, it easily falls apart, affecting its lifespan. The gaskets are all standard, unless purchased incorrectly or have defective manufacturing dimensions.
We do this because the size of the gasket required is not standard
This can also be solved easily; many of our cushions are also custom-made. Just tell the manufacturer the dimensions, and they will fabricate them according to those specs.
This won’t work; the solder joints of the basic type of winding gasket are located in the outer and inner layers. If you peel off too many layers, the strength will not be sufficient. It collapses under pressure. It disperses easily. It doesn’t provide any sealing effect at all.
I’m from Nanjing; there are manufacturers here. Where are you from
No. If the gasket is selected correctly, the dimensions should be fine.