Issues with connecting chlorine gas cylinders to vaporizers
Thread Content
Could someone explain in detail what kind of pipes and fittings are needed from the liquid chlorine cylinder all the way to the vaporizer? What I have in mind is using φ10 copper pipes with G3/4 threaded couplings at both ends; one end would connect to the cylinder, and the other end would connect to a short carbon steel section with G3/4 threads. One end of this short section would then be connected to a threaded tee (for multiple cylinders) or a DN20 double-threaded clamp (GB14383), and that clamp would in turn connect to the carbon steel pipe (for a single cylinder). I’m not sure if this will work – maybe there are too many connections
How is the carburetor working? One end of the copper tube is connected to a gas cylinder via threads, while the other end is connected to a pipe using a flange.
What type of threading is on your cylinder? At most, you can add a stop valve in the middle for control
Is it a copper tube with threads on one end and a flange on the other? Is it a standard part or a custom one? What is the usual thread size?