I’d like to share with you some minor improvements and innovations for chlor-alkali plants

Thread Content

Hello, dear colleagues. I’d like to share here some minor improvements made to the chlor-alkali production facility. I also ask everyone to share their own successful improvements as well, so that we can all improve together: handshake ① All the desalinated water and concentrated water are used for flushing the toilets in the office buildings and the production area； ②After the pH value of the acid wash water from the resin tower is adjusted, it is all sent to the primary brine mixing tank for desalination purposes ； ③Dechlorinated brine is prepared without sodium hydride; only alkali is used to adjust the pH to around 5. Some of this brine has its pH adjusted to above 9 before being sent to the water mixing tank, where it undergoes salt dissolution ； Another portion undergoes denitration, with sodium hydride added further to remove free chlorine before denitration takes place. ④Hot exchange between wet chlorine gas and brine ； ⑤The wash water from the hydrogen scrubber is used to absorb hydrochloric acid-containing exhaust gases, and then it is sent for desalination ； ⑥In the pipeline for removing accidental chlorine using the Na2SO4 pump in the packaging process, a mist catcher is added before the accidental chlorine is absorbed, thereby preventing impurities such as acid and rust from contaminating the quality of sodium hypochlorite. The above points are meant to serve as a starting point for discussion; I hope fellow sailors will offer their guidance and share their own small improvements and innovations: handshake