Thread Content
This post was last edited by LQ198619 on 2017-6-28 at 16:18. What is shown in the image above? +10 wealth for correct answers! State the usage precautions and earn an extra 5 wealth points! Answer: Seat belt: http://down.hcbbs.cc/attachment/forum/201706/10/203353z7y06fdo70r6eod0.jpg. Petrochemical area – New ideas for energy conservation: the “Creative Ideas” campaign (the second phase is currently in full swing): http://bbs.hcbbs.com/forum.php?mod=viewthread&tid=1666758 (Source: Haichuan Chemical Industry Forum)
Seat belts must never be worn low and positioned too high~~~ It can lead to accidents~~
Seat belt: 1) The seat belt should be fastened at the hip area, below the waist and above the buttocks. (2) Tighten the small strap of the seat belt. (3) The safety belt should be worn high and used low, taking care to prevent swinging and collisions. (4) The safety belts and backup ropes in use should be attached to sturdy components, and it is necessary to check that they are properly fastened. The safety rope must be tied to the same working surface; it is prohibited to hang it on moving objects or those with sharp corners that are not stable, and it is strictly forbidden to use it by hanging it low while working at a high height. (5) The hook latches of the safety belts and backup ropes in use must be in the locked position. (6) Due to operational requirements, a buffer should be installed on safety ropes that are longer than 3 meters.
Seat belts must not only be fastened high, but a safety check should also be conducted before use, and the buckles must be properly secured.