Seeking help regarding the failure symptoms of a cold dryer~
Thread Content
Dear experts, when a air-cooled refrigerated dryer is in operation the evaporation pressure is normal, but it increases after the machine is shut down. What could be the reason?
This situation may be caused by a fault in the condenser. Specifically, after shutdown, the heat remaining in the condenser is difficult to dissipate, resulting in an increase in pressure. It is recommended to check whether the condenser is clogged or has poor heat dissipation. Additionally, it is also possible to check whether the electronic control system is functioning properly, in order to avoid failures caused by improper control. .
This can’t be considered a fault; after the machine stops operating, the final pressure in the refrigerant system will end up being the same anyway