Is stress analysis easy to learn?
Thread Content
For stress analysis these days, there’s no need for manual calculations; instead, stress analysis software is used. First, a 3D model is created, then constraint conditions are applied, the mesh is divided, and finally stress analysis can be carried out. It’s incredibly user-friendly – is it really necessary to learn theoretical mechanics anymore?
Dear everyone, the online training course on the analysis and design of pressure equipment (Phase 2) will begin on April 4th. We welcome you to attend: http://designee.ke.qq.com
I also want to learn *stress analysis; I have just purchased two training courses, at 198 yuan each, for a total of 296 yuan. It’s an excellent way to get started from scratch; it’s very practical, so I recommend it to everyone. I hope this will be helpful to everyone.
I made a mistake; it’s 396. Last night everything was fine – I opened my phone and read it twice; it was explained very well, in a simple yet thorough manner. Really excellent!
This ad is great! It needs to be supported!
The original poster has a misunderstanding; I don’t know the person who gave the lecture. I saw it in the stress analysis group, thought it was good, so I shared it with everyone. I hope this can be of help to everyone.
I see. Have you learned this before, OP? To what level can one reach with no prior knowledge? I learned material mechanics, and I’ve almost forgotten it all. I know nothing at all about elasticity theory, plasticity theory, and so on. Can it be learned?
It is through study that I came to understand that modern stress analysis is carried out using stress analysis software: a 3D model is created, constraints are applied to apply forces, the mesh is divided, and then stress analysis is performed, whereby the stresses in various parts of the 3D model become apparent. Learning stress analysis is not difficult. If you want to obtain a stress analysis certification, it’s still necessary to put effort into the basic theories. But to obtain a stress analysis certification, you also need to present a diagram along with the calculation procedures for your stress analysis, and then give a defense. Of course, a theoretical exam is also required.
Hehe, without a foundation in theoretical mechanics, material mechanics, or elasticity mechanics, it’s laughable to try to learn finite element analysis. The story is well told; keep writing
Only in times of crisis does one’s true character come to light. By following rules blindly and being afraid of everything, one will never be able to learn stress analysis. Stress analysis isn’t that scary; the original poster is still stuck in a mindset from decades ago.