After reading the drawings, which drawing should be followed for construction?
Thread Content
The front view and orientation diagram of the gas storage tank. Which diagram should be followed for the construction of the manhole?
I guess your confusion is that the orientation of the shaft lugs is different between the front view and the top view. As for the final nozzle orientation, first check whether the nozzle orientation in the drawing is based on this drawing or the nozzle orientation diagram. ； If it is based on the nozzle orientation map, follow the nozzle orientation map provided. ； If it is this picture, since you have questions, it is better to confirm it with the designer just in case and to avoid rework.
If the orientation of the nozzle is as shown in this figure, press the top view.
Personally, I think it should be based on the top view.
Both pictures must be clicked. The front view is the distance from the central axis, and the top view (direction of the nozzle) is the size in that direction.
It is inconvenient and dangerous to open the manhole cover in the front view. This is considered a design error. Determine the direction of the manhole cover according to the top view.