Regarding the meaning of Alfa Laval model numbers
Thread Content
Our company currently has an M10-MFR plate heat exchanger that requires replacement of its plates and seals; what model of plates should be chosen?
A long time has passed and a lot of information is no longer available! That’s why I came to the forum to ask for help from all the experts here
M10 denotes an interface pipe diameter of 4\" (DN100)
M10 denotes a DN100 interface, M indicates that the plate has a groove depth of 4 mm, and FR is the code for the frame.
I have replicas with exactly the same dimensions; I can provide the dimensional specifications for you to compare
DN100 diameter, wide-channel plates; the size, angle of the plates, and material of the gaskets are unknown. It would be helpful if you could provide relevant parameters (temperatures on the hot and cold sides, flow rate, type of fluid). I can help you select a similar model (I work with Alfa series); my contact number is 18151917775 (also available on WeChat).