Arrogant 55037

Thread Content

Announcement by the Ministry of Housing and Urban-Rural Development on the Issuance of the **Standard \"General Code for Building Fire Protection\": The \"General Code for Building Fire Protection\" is hereby approved as a **standard, with the code number GB 55037-2022; it shall come into effect on June 1, 2023. These specifications are mandatory engineering construction standards, and all provisions must be strictly implemented. In the event that the relevant provisions in the current engineering construction standards are inconsistent with those of this specification, the provisions of this specification shall prevail. At the same time, the following mandatory provisions related to engineering construction standards shall be repealed: 1. Article 3.2.2 and others of the \"Code for Fire Protection Design of Buildings\" GB 50016-2014 (2018 edition) ； II. Article 1.0.4 and others of the «Code for Fire Prevention in Rural Areas» GB 50039-2010 ； III. Article 3.0.2 and other provisions of the «Code for Fire Protection Design of Garages, Repair Shops, and Parking Lots» GB 50067-2014 ； IV. Article 3.1.2 and others of the \"Code for Fire Protection Design of Civil Air Defense Projects\" GB 50098-2009 ； V. Article 4.1.6 and others of the \"Code for Fire Protection Design of Petrochemical Enterprises\" GB 50160-2008 (2018 edition) ； VI. Article 3.1.1 and others of the «Code for Fire Protection Design of Oil and Gas Engineering Projects» GB 50183-2004 ； VII. Article 4.0.1 and others of the «Code for Fire Protection Design of Interior Decoration of Buildings» GB 50222-2017 ； 8. GB 50229-2019, \"Fire Protection Design Code for Thermal Power Plants and Substations\", 3.0.1... etc ； 　9. GB 50313-2013, \"Design Code for Fire Communication and Command Systems\", 4.1.1 (1, 2, 3, 5)… etc ； 10. Article 3.0.2 and others of the «Code for Fire Protection Design of Hangars» GB 50284-2008 ； 11. Articles 3.1.2 and 3.1.7 of the \"Code for Design of Fire Dikes in Tank Farm Areas\" GB 50351-2014. 12. Article 2.0.4 and others of the «Code for Fire Protection Construction and Acceptance of Interior Decoration in Buildings» GB 50354-2005 ； 13. GB 50383-2016, \"Code for Fire Protection and Sprinkler System Design in Coal Mines\", 3.1.1... etc ； 14. Articles 4.1.1 and 4.7.2 of the \"Code for Construction and Acceptance of Fire Communication Command Systems\" GB 50401-2007. 15. Article 4.3.3 and others of the \"Fire Protection Design Code for Iron and Steel Metallurgy Enterprises\" GB 50414-2018 ； 16. Article 4.1.4 and others of the \"Code for Fire Protection Design of Textile Engineering\" GB 50565-2010 ； 17. Article 4.2.3(2)… etc. of the Code for Fire Protection Design of Non-ferrous Metal Engineering GB 50630-2010 ； 18. Article 3.0.1 and subsequent articles of the «Code for Fire Protection Design of Wineries» GB 50694-2011 ； 19. Article 3.2.1 and others of the \"Technical Code for Fire Safety at Construction Sites\" GB 50720-2011 ； 20. GB 50745-2012, \"Code for Fire Protection Design of the Conventional Island in Nuclear Power Plants\", 3.0.1... etc ； 21. Article 3.0.3 and others of the \"Code for Fire Protection Design of Hydropower Engineering\" GB 50872-2014 ； 22. GB 50877-2014, \"Code for Construction and Acceptance of Fire Shutters, Fire Doors, and Fire Windows\", 3.0.7... etc ； 23. Articles 4.1.1, 4.1.2, 6.1.3, 6.1.4, and 10.1.2 of the \"Code for Fire Protection Design of Water Conservancy Projects\" GB 50987-2014. 24. Articles 3.0.9, 4.1.7, 4.2.2, 4.2.8, 4.2.9 (8, 9), 4.15.2, 5.1.10 (3, 6) and 6.5.4 of the \"Code for Design of Urban Fire Stations\" GB 51054-2014. 25. Articles 3.1.1, 3.1.3, 3.1.4(1,2), 3.2.1(2), 3.2.4(2), 3.3.3(3), 4.1.2(1), 4.3.1(1,2) and 5.2.1 of the Code for Fire Protection Design of Coal Mines GB 51078-2015. 26. Article 4.1.5 of the \"Code for Urban Fire Protection Planning\" GB 51080-2015. 27. Articles 3.2.1, 3.3.9, 3.3.10, 3.4.1, 3.4.8, 3.5.5, 3.5.6, and 3.5.7 of the \"Code for Fire Protection Design of Civil Airport Terminal Buildings\" GB 51236-2017. 28. Articles 3.1.1, 3.1.2, 3.1.3, and 3.2.1 of the \"Technical Code for Fire Protection of Building Steel Structures\" GB 51249-2017. 29. GB 51283-2020, \"Fire Protection Standards for Engineering Design of Fine Chemical Enterprises\", 4.1.5... etc ； 30. Articles 4.1.1, 4.1.4, 4.1.5, 5.1.1, 5.1.4, 5.1.11, 5.4.2, 5.4.3, 5.5.5, 8.4.7, 9.5.4, 11.1.1, and 11.1.5 of the \"Code for Fire Protection Design of Subways\" GB 51298-2018. 31. Articles 3.0.2, 4.1.2, 5.1.3, 5.2.4, 5.2.5, 5.2.9, 5.3.1, 5.3.6, and 5.3.7 of the \"Fire Protection Standards for Transitional Settlement Sites in Disaster Areas\" GB 51324-2019. 32. Articles 4.1.5, 4.1.6, 4.2.5, 5.1.1, 6.3.8, 7.1.6, 7.2.2, 7.2.3, 7.2.18, 8.0.1, 8.0.6, 8.0.7, 8.0.8, 9.7.1, 10.1.3, 10.2.3, and 10.3.5(5) of the \"Fire Protection Standards for Coal Chemical Engineering Design\" GB 51428-2021. These clauses have been abolished; these mandatory provisions are even less stringent than those in the non-bolded text. How should they be implemented in engineering projects?