How to calculate the flow rate of compressed air
Thread Content
Given the pressure and diameter of the compressed air, how can its flow rate be calculated? Such as compressed air 7 kg, pipe DN25
Baidu should have a formula, or some software
I know what the pressure and pipe diameter are for; when there is no gas flow, the flow rate is 0, but the gas can reach a velocity of 200 m/s at venting speed
The flow rate varies depending on the selected velocity. The flow rate of low-pressure gases is generally controlled at 8-15 meters per second. The flow rate can be calculated based on the pipe diameter. The standard value can be calculated using the PV formula. The correct approach should be to select the pipe diameter based on flow rate and pressure. Instead of calculating the flow rate based on the pressure pipe diameter.
Stop discussing this nonsense – this idiot hasn’t even registered, so next time we won’t be able to find this post. It’s pointless to talk to air; posting should be restricted to people of a certain age
Does your formula take time into account? How to calculate traffic
You mean design, right? But with only the pipe diameter and pressure known at present, if the cross-section of the pipe is divided, what will be the flow rate, and how can it be calculated?
For the maximum value, just use the designed maximum flow rate of 15 m/s. The maximum design value refers to the figure selected by the design institute if a proper design is carried out. But how much actually? I don’t know if it was designed properly or not.
For the maximum value, just use the designed maximum flow rate of 15 m/s. The maximum design value refers to the figure selected by the design institute if a proper design is carried out. But how much actually? I don’t know if it was designed properly or not.
For the maximum value, just use the designed maximum flow rate of 15 m/s. The maximum design value refers to the figure selected by the design institute if a proper design is carried out. But how much actually? I don’t know if it was designed properly or not.