VCM device magnetooxide analyzer
Thread Content
Dear experts: In the VCM system, there are several magneto-oxidimetric analyzers that require an analysis time of less than 4 seconds, with sample temperatures of either 40°C or 130°C. The components of the sample include corrosive C2H4Cl2 at 0.18%, CO2 at 2.15%, CO at 0.706%, C2H6 at 0.358%, C2H5Cl at 0.067%, C2H4 at 1.0%, H2 at 0.395%, HCl at 1.161%, CH4 at 0.345%, N2 at 86.9%, O2 at 6.0%, Ar at 0.72%, and C2H2 at 0.001%, among others. For participation in interlocking, SIL2 is required. Which brand and model of magnetized oxygen device would be more suitable? Thank you to all the experts.
How were the times of 4 seconds and sil2 determined?
Magnetometric gauges of the 4-volt type are better – they are stable and have high precision.
In my opinion, aside from Shifu Mei’s products which are up to the task, there’s no need to consider any others. It’s not that the other companies are bad, but Shifu Mei is considered the most reliable in everyone’s eyes. Let’s speak in terms of performance.
Expert, how is the Siemens OXYMAT 6F? We need to consider at least two companies.
Expert, how is the Siemens OXYMAT 6F?
The magnetic mechanical oxygen analyzer is the best choice, namely the SiFuMei. I haven’t used the Siemens model you mentioned, so I don’t have any opinion on it. Our company uses Si Fu Mei a lot, and it’s really effective.
If two are considered, four can’t be bought – it’s useful but expensive