Select an appropriate interfacial meter
Thread Content
The upper layer of the medium is an aqueous salt solution, while the lower layer is a mixture of organic solvents that is non-conductive; the density difference between these two layers is small. Are there any suitable instruments for this purpose? I would appreciate some recommendations.
RF admittance should work, right? Consult the manufacturer
For an interfacial instrument based on the principle of buoyancy, the density difference should preferably be no less than 0.15. If a radar is used, with the dielectric constant being higher at the top and lower at the bottom, can only an inverted configuration be used? It needs to be confirmed by the instrument manufacturer. A capacitive type can be chosen.
For an interfacial instrument based on the principle of buoyancy, the density difference should preferably be no less than 0.15. If a radar is used, with the dielectric constant being higher at the top and lower at the bottom, can only an inverted configuration be used? It needs to be confirmed by the instrument manufacturer. A capacitive type can be chosen.
I have a relatively inexpensive product that can do the recognition. However, it can only perform point-based detection and is suitable for limit detection. Another product is more expensive; it uses mechanical scanning to detect multiple interfaces within the liquid. Could it depend on the medium’s temperature and pressure? If you don’t mind, please add me on WeChat for further communication. fzb18201151906