A control valve is needed
Thread Content
It is necessary to adjust the pressure from 11 MPa to 0.02 MPa in order to control the flow rate. The medium is hydrogen sulfide, containing a small amount of impurities. Are there any recommendations, or any methods available, such as pressure reduction?
This post was last edited by lijie2007521 on 2023-2-4 at 19:50. Add me as a friend in Sichuan; send me your requirements and I’ll help you choose the right option.
I suggest using some type of regulating device to control the pressure, as well as a filter to remove those impurities. Additionally, you need a metering device that offers various adjustment options and can be connected to the system’s pipes in order to regulate flow.
We are using Samson’s labyrinth valve; the pressure is 10 Mpa before the valve and drops to 0.1 Mpa after it.
We use Samson’s labyrinth valve; the pressure is 10 Mpa before the valve, and it drops to 0.1 Mpa after the valve. A safety valve must be installed on the side after the valve.