Use an electromagnetic flow meter for softened water
Thread Content
Can domestic electromagnetic flowmeters be used for the soft water produced by steel mills, whose conductivity is between 50 and 60 Siemens?
Yes, domestic electromagnetic flowmeters are suitable for measuring the flow rate of conductive liquids, including softened water. It can be used as long as its measurement range is suitable for the conductivity of softened water in steel mills. .
Steel mills should not be short of money; buying imported products is more hassle-free.
Electromagnetic flowmeters can currently be used in most applications in China; from a technical perspective, they are not particularly complex devices. However, for some special media with low electrical conductivity, imported models are still far superior. A conductivity of 50–60 is not low; I remember that the lowest value in Cologne was 2, and domestic electromagnets are satisfactory.
Yes, the conductivity is sufficient. Please trust our domestic instruments – at the current stage, their quality is on par with that of imported ones