Syngas carrying fly ash
Thread Content
May I ask: does \"syngas carrying fly ash\" refer to the gasification furnace or the water washing tower (carbon scrubbing tower)? How can fly ash in the syngas be controlled?
The detachment of fine ash in high-temperature gases, or its complete detachment, has always been a rather difficult issue. Currently, the dust content in the syngas at the outlet of conventional single-nozzle gasification furnaces is above the specified limit. For enterprises in the fine chemicals industry, many choose to use ammonia produced from natural gas rather than ammonia derived from coal, and that is for this very reason. Measures can be taken to continuously reduce it, but it cannot be completely eliminated. For example, using cyclone separators, improving the design of venturi washers, optimizing the design of tray plates, and adopting measures to change the boundary zones, and so on.
It generally refers to the dust content in the process gas at the outlet of the scrubber tower
, from which aspects do you exercise control?
\"With ash\" generally refers to the amount of ash in the gasification unit; in simple terms, it is the amount of ash remaining after ash removal measures have been taken
Dry dust collection can be used, along with ceramic fly ash filters for filtration and purification! Phone: 13053363308
Gas scrubber tray water level, gas scrubber liquid level, gas scrubber black discharge
The internal structure of the carbon cleaning tower can be optimized to ensure that the gas coming out of the gasification furnace is thoroughly cleaned, so that the ash content in the gas exiting the carbon cleaning tower is less than 1 mg/m3; at the same time, the heat exchange efficiency of the carbon cleaning tower can be improved.