How to cut a hard pipe for the burner cooling water hose?
Thread Content
Nozzle cooling water hose to rigid pipe SOP
A three-way valve should be used to connect the hose, the rigid pipe, and the burner; once the burner is installed, the direction of the three-way valve should be changed
The prerequisite is that once the process burner has been assembled, that is, after all the flanges for the burner’s cooling water pipes have been connected and the various pipelines of the burner along with their end cap flanges are nearly connected, contact the control room to switch from flexible hoses to rigid pipes using a three-way valve; during this process, pay close attention to the flow rate of the cooling water for the burner.
It’s too simple; learn * and add me at 1017429071