One question per day: Coal-to-oil and olefins forum, December 25, 2017
Thread Content
3.jpg Participation: Prize of 5 Wealth； Correct answer: Reward of 10 wealth points ； Note: This post is valid for 48 hours. Question: What is the function of the lubricating oil tank in the turbine lubrication system of the (DMTO) olefin separation unit? It stores all the lubricating oil used by the system, helps with heat dissipation (or heating), settles out some of the mechanical impurities present in the oil, and removes the water and gases contained within the oil Note: The answers will be released automatically in two days!
All the oil used in the oil storage system, some of the mechanical impurities present in the cooling and sedimentation oils, as well as the water and gases entrained in the separated oil
The oil used to lubricate the turbine
All the oil used in the oil storage system, as well as some of the mechanical impurities present in the oil used for cooling (heating) and sedimentation, as well as the water and gases entrained in the separated oil
Used for lubricating high-speed machinery, primarily serving to provide lubrication, heat dissipation, and cooling
It supplies the lubricating oil required for the lubrication of turbine equipment, and can also provide the lubricating oil necessary for the oil lines to return to their normal position after an emergency shutdown.
All the oil used in the oil storage system, as well as some of the mechanical impurities present in the oil used for cooling (heating) and sedimentation, as well as the water and gases entrained in the separated oil.