Thread Content
This post was last edited by liaifeng on 2018-8-5 17:11. Headline! Oil production begins at Shanxi’s 1.8 million-ton coal-to-oil project! Author/Source: Huahua Net Coal Chemicals Date: 2018-01-02 Clicks: 19 On December 31, Lu’an Group held a meeting to report on the successful production of products from its 1.8 million tons per year integrated demonstration project for the clean utilization of high-sulfur coal for oil, chemicals, electricity, and heat generation. The project has been officially completed and put into operation, entering a phase of stable production and improved efficiency. It is reported that the Lu’an 1.8 million tons per year integrated demonstration project for the clean utilization of high-sulfur coal for oil, chemical, and thermal production is a major landmark project for the comprehensive reform and transformation in Shanxi Province. Using Luan’s own high-sulfur coal as raw material, the project integrates advanced international technologies to achieve clean and efficient utilization of coal, thereby producing 49 types of high-end fine chemicals across five categories, including premium waxes, aromatic-free solvents, special fuels, high-quality lubricants, and specialty chemicals, in addition to generating over 115 MW of power from waste heat. The project serves as a demonstration for large-scale gasification technologies for **\"high-carbon, high-sulfur, and high-ash\" coal, a demonstration of coal-based Fischer-Tropsch synthesis for the production of high-value chemicals, a model for upgrading traditional coal chemical processes such as those involving methanol, and a demonstration of high environmental standards in modern coal chemical manufacturing. The Lu’an 180 project commenced construction in February 2013 ; The project was completed in October 2015 ; On March 4, 2016, approval was obtained from the **Ministry of Environmental Protection** ; In November 2016, it received approval from the National Development and Reform Commission; on December 4, 2017, the FTO synthesis unit began producing products, and on December 29, the refining unit started yielding qualified products. Thus, the entire production process was completed successfully, entering a phase of stable operation and improved efficiency. Li Jinping, chairman and party secretary of Lu’an Group, said that with the completion and operation of the 180 project, Lu’an has achieved \"three major breakthroughs\": technical advancements in the successful application of large-scale pulverized coal gasifiers with high ash melting points and low silicon-aluminum ratios ; It established the first III+ base oil production facility in China and the second such facility in the world, laying a solid foundation for Lu’an’s high-end lubricants to break through foreign restrictions and replace imported products. It is truly a product of \"Made in China\" and a \"Chinese brand\"” ; A series of coal-based fine chemical products has been developed, comprising 5 categories, 27 types, 48 specifications, and 180 models. This has paved the way for the creation of new high-end coal chemical products in series, laying the foundation for the development of world-class high-end chemical enterprises with global competitiveness. Focusing on the new type of high-end coal chemical industry led by 180 projects, Lu’an has developed \"three models\": an integrated operation model for coal and high-end coal chemicals that encompasses the transfer of advantages, the transformation of driving forces, and industrial transformation. Technological innovation + business model innovation, a diversified equity cooperation model that leverages complementary strengths. An integrated collaborative innovation development model for industry, academia, research, and application. Around the completion and operation of Project 180, Lu’an has established \"three demonstrations: a demonstration for the clean utilization of high-sulfur coal.\" By making clean and efficient use of waste high-sulfur coal, high-purity oils (sulfur-free and free of impurities) as well as high-end refined products (PAO, low-aromatic solvent oils, Fischer-Tropsch waxes, etc.) are produced, thus turning waste into treasure. Demonstration of an energy-saving, emission-reducing circular park. The total environmental protection investment for the project amounts to 2.499 billion yuan, accounting for 10.56% of the project’s total investment. From the outset of its construction, Project 180 has been carried out in strict accordance with **relevant standards, meeting ultra-low emission requirements ; Introduction of the advanced wastewater treatment zero-discharge technology, with Sinopec Singapore investing in its construction ; At the same time, the project also includes a range of environmental protection facilities for advanced treatment, such as an accident tank with a capacity of 350,000 cubic meters, devices for treating VOCs in decarbonized exhaust gases, and systems for desulfurizing carbon dioxide exhaust gases. Once completed, the environmental protection project will serve as a model and example for the industry. A demonstration of deep integration and innovation between the military and civilians. It actively promotes the adoption of products such as mPAO, high-density diesel, aviation kerosene with high thermal oxidation stability, and high-density liquid propellants in the military, serving as a model enterprise for deep integration between the military and civilian sectors. Focusing on the high-quality development of the 180 projects, Li Jinping called for special attention to be paid to safety at the source ; Ensure the safe, stable, long-term, efficient, and high-quality operation of the project ; Led by marketing, establish a comprehensive and open marketing system to build high-end brands ; Comprehensively strengthen the development of the cadre and talent pool, and turn Project 180 into a hub for high-end, modern coal chemical industry talents in Lu’an and across the country ; By strengthening openness to the outside world and creating new hubs and platforms for such openness, it is necessary to focus on Shanxi while also looking towards the whole country and the world as a whole. Efforts should be made to enhance exchanges in technology and sales. The priority is to develop enterprises that serve as models for Shanxi’s openness to the outside world as well as for cooperation along the Belt and Road Initiative. By leveraging high-end technological capabilities, strategic partnerships can be established with companies such as Shaanxi Gas Group, Xinjiang Rongtai Group, Xinye Group, and Thailand’s PTT, in order to build bases for natural gas liquefaction on a million-ton scale as well as for high-quality lubricant base oils, thereby enhancing international competitiveness ; Conduct comprehensive international benchmarking to create a Chinese version of Saurer. At the meeting, Li Weidong, chairman of Lu’an Coal-based Clean Energy Company, introduced to the attendees the great significance of the project, its construction process, current operational status, and market prospects. The head of the safety supervision team assigned to Project 180 by Lu’an Group reported on the emphasis placed on safety throughout the project’s construction phase, as well as the main measures taken for safety management and the results achieved. Representatives of collaborating parties such as Sinochem Synthetic Oil Engineering Co., Ltd., Sinochem Second Construction Group Co., Ltd., and Huisheng Engineering (China) Co., Ltd. congratulated on the successful oil production from the project, and expressed their sincere appreciation for the hard work put in by the project’s builders and participants over the years. It was also stated that, taking the successful oil production as a new starting point, full support will be continued as always for the development of the project, with every effort being made to ensure that the project reaches full operational capacity at an early date and can operate stably in the long term, so as to live up to Lu’an’s trust and expectations. After the presentation, the attendees went together on a site visit to the project’s dispatch and control center, the oil blending plant, and the liquid storage and transportation plant, to learn about the project’s technical processes, equipment, and actual operational conditions on site. At the product loading and sampling point of the Liquid Storage and Transportation Plant, the attendees witnessed together the important moment when clear, qualified oil flowed slowly out of the pipeline. Amidst applause and laughter, everyone took photos together to share in the joy of success. At the loading site, 6 tank trucks loaded with 30 tons of qualified oil are ready to set off.