(Daily Question) Coal-to-Oil and Olefins Forum, 2018.1.28
Thread Content
3.jpg Participation: Prize of 5 Wealth； Correct answer: Reward of 10 wealth points ； Note: This post is valid for 48 hours. Question: What are the two main components of the electro-hydraulic converter in the turbine speed control mechanism of the (DMTO) olefin separation unit? The electro-hydraulic converter mainly consists of a torque motor (electromagnetic part) and a hydraulic amplification unit. The function of a torque motor is to convert the valve position deviation electrical signal sent by the electronic control unit into a mechanical displacement signal ； The function of the hydraulic amplification unit is to convert mechanical displacement signals into hydraulic signals that control the displacement of the hydraulic actuator. Note: The answers will be released automatically in two days!
The electro-hydraulic converter consists of two main parts: one is the electrical-to-displacement conversion part； The other part is the hydraulic amplification section.
The electro-hydraulic converter consists of two main parts: one is the electrical-to-displacement conversion part； The other part is the hydraulic amplification section.
The electro-hydraulic converter consists of two main parts: one is the electrical-to-displacement conversion part； The other part is the hydraulic amplification section.
Hasty passerby on the 3rd floor? The electro-hydraulic converter consists of two main parts: one is the electrical-to-displacement conversion part； The other part is the hydraulic amplification section.
Question: What are the two main components of the electro-hydraulic converter in the turbine speed control mechanism of the (DMTO) olefin separation unit? Answer: The electro-hydraulic converter is mainly composed of a torque motor (electromagnetic part) and a hydraulic amplification unit. The function of a torque motor is to convert the valve position deviation electrical signal sent by the electronic control unit into a mechanical displacement signal ； The function of the hydraulic amplification unit is to convert mechanical displacement signals into hydraulic signals that control the displacement of the hydraulic actuator.
The electro-hydraulic converter consists of a torque motor and a hydraulic amplifier
The electro-hydraulic converter consists of two main parts: one is the electrical-to-displacement conversion part; the other is the hydraulic amplification part
The electro-hydraulic converter consists of two main parts: one is the electrical-to-displacement conversion part； The other part is the hydraulic amplification section.
The electro-hydraulic converter consists of two main parts: one is the electrical-to-displacement conversion part; the other is the hydraulic amplification part