Tender Announcement for Tower and Vessel Equipment of the 200,000 standard cubic meters per hour Oil-to-Hydrogen Production Unit in Phase II of Sinopec Ningbo Engineering Co., Ltd. Zhenhai Facility

Thread Content

Bid Announcement for Tower and Vessel Equipment of the 200,000 standard cubic meters per hour Hydrogen Production Facility in Phase II of the Zhenhai Base of Sinopec Ningbo Engineering Co., Ltd. Author/Source: Date: 2022-05-09 Clicks: 5 1. Bidding Conditions For this bidding project, namely the tower and vessel equipment (WZ20220525-2103-5700-B1) for hydrogen production at the Zhenhai Refining and Chemical Plant, the bidder is Sinopec Ningbo Engineering Co., Ltd. The funds for this project come from the company’s own capital, with a contribution rate of 100%. The project has met the conditions for bidding; therefore, a public tender is being conducted for the procurement of tower vessels. 2. Project Overview and Scope of Bidding 2.1 The project has been approved and the funding has been secured. 2.2 Scope of the tender: 2.3 Technical specifications: See the specific tender documents. 3. Qualification requirements for bidders: 3.1 For this tender, bidders must meet the qualifications, experience, and other requirements specified in this clause, as well as possess the capacity to supply goods corresponding to this tender project. 3.1.1 The bidder shall possess a business license, tax registration certificate, and organization code certificate, or be registered under the \"three-in-one\" registration system, with valid licenses. 3.1.2 By the bid deadline, the bidder has not been included by the administrative department for industry and commerce on the list of enterprises with serious violations of laws and dishonesty in the **Enterprise Credit Information Publicity System ； Nor has it been included on the list of dishonest defendants on the \"Credit China\" website. 3.1.3 The bidder is not under a period of risk suspension or suspension due to breach of contract imposed by Sinopec. 3.1.4 The bidder has not been ordered to suspend operations, have its licenses temporarily seized or revoked, or have its permits temporarily seized or revoked ； There is no situation of entering liquidation proceedings, being declared bankrupt, or otherwise losing the ability to fulfill obligations. A commitment letter signed by the legal representative or authorized representative and stamped with the company seal must be provided. 3.1.5 The bidder has not experienced any major safety-related incidents in the past two years. A commitment letter signed by the legal representative or authorized representative and stamped with the company seal must be provided. 3.1.6 Manufacturing License: Hold an A1-level pressure vessel design and manufacturing license (Special Equipment Production License) issued by the General Administration of Quality Supervision, Inspection and Quarantine. 3.1.7 Management Systems and HSE Systems: The bidder shall possess valid ISO9001 quality management system certification, valid environmental management system certification (ISO14001 or equivalent), and valid occupational health and safety management system certification (OHSAS18001 or equivalent), and shall submit copies thereof in the bid documents. 3.1.8 Financial Condition: The profit margin for the past three years (2018–2020) must have been no less than 0; bidders shall provide copies of financial audit reports conducted by a third party. The debt-to-asset ratio over the past three years must not exceed 80%. 3.1.9 Manufacturing site: The equipment must be fully manufactured and transported as a whole from the manufacturer’s facility located at the bidder’s address (the address registered for the manufacturing license). Bidders must have the capability to manufacture the equipment as a complete unit, and to lift or roll it onto a ship for sea transport. 3.1.10 Equipment: a) Workshop crane: 200T per crane (clear photos, nameplate images, or relevant certification documents to be provided) ； b) Sheet rolling machine: Sheet rolling capacity of 160 mm (clear photos, label images, or relevant certification documents to be provided) ； c) Size of the heat treatment furnace: The length, width, and height of the heat treatment furnace must all be at least 7 meters (clear photos, pictures of the nameplate, or relevant certification documents must be provided) ； 3.1.11 Performance: Over the past 5 years (with contract delivery periods ranging from January 2016 to December 2021), the bidder must have: 1) experience in manufacturing at least 10 units each for two sets of POX (coal-based or oil-based hydrogen production) plants, along with copies of the relevant contracts. 2. Proof of manufacturing experience in at least 4 tower vessels made of composite plates with a base wall thickness of ≥50mm for POX (coal-to-hydrogen or oil-to-hydrogen) plants; provide a copy of the contract. 3. Proof of manufacturing experience for at least 2 CrMo steel components with a diameter of ≥2500 mm and a wall thickness of ≥70 mm in POX (hydrogen production from coal or oil) plants; provide copies of the relevant contracts. The copy of the contract should include the first page of the contract, the pages with signatures and seals, as well as the equipment list. A copy that is not clear or one that is not provided at all will be considered invalid performance. 3.1.12 Digital delivery: The bidding supplier must provide a written commitment that, upon winning the bid, it will submit the final version of the project-related documents in accordance with the owner’s requirements for digital delivery, covering the processes of equipment/material procurement, manufacturing, inspection, testing, assembly, acceptance, and delivery. The supplier’s quotation document shall include the costs associated with digital delivery. The supplier must guarantee that if the cost of digital delivery is not explicitly stated in the quotation, it means that this service is provided free of charge. 3.1.13 Payment terms: 10% advance payment, 60% upon delivery, 20% upon commissioning, and 10% as a quality guarantee deposit. Acceptance bill or wire transfer. Payment upon delivery: after all equipment and completion documents have been delivered ； Debugging phase: After the device has been debugged and is operational ； Quality guarantee period: 24 months after the completion and acceptance of the project. 3.1.14 Other conditions required by laws and regulations. 3.1.15 For detailed requirements, please refer to the tender documents. 3.2 Joint bids are not accepted for this tender. 3.3 This tender accepts applications from producers/manufacturers; bids from agents are not accepted, nor are bids from distributors. 4. Acquisition of Tender Documents 4.1 Those interested in bidding are requested to download the electronic tender documents from (please log in) between 8:00 on May 5, 2022, and 16:00 on May 12, 2022 (Beijing time, the same below). 4.2 The price of each set of tender documents is 2,000.00 yuan, and no refund will be provided after purchase