centrifugal pump
Thread Content
Calculation of gasket thickness at bearing gland of single-stage centrifugal pump
In order to calculate, you must first have data, and the source of the data must be measured. There is also relevant material property data.
Just leave a gap of 10 wires.
This is not difficult, either gaskets or O-types will do. If you are not sure, consult the manufacturer.
Send me the structural diagram, different structures are different!
Send me the structural diagram, different structures are different!
Use the depth gauge to measure the gap from the outer ring of the bearing to the end face of the bearing box and from the boss of the bearing cover to the end face of the bearing cover. If the gap is small, add a gasket; if the gap is large, add a gasket. Guaranteed o.1o∽O.2Omm.
Find the relative position, measure the two numbers and subtract them. After tightening the bearing gland bolts, ensure that the axial clearance between the bearing outer ring and the bearing gland is 0.1-0.2mm.